There are few things more annoying than squeaks, especially if they are intermittent. Garage doors can be a particular problem, as they have lots of moving parts that can wear and dry out over time, leading to unwanted noises.
Fortunately, attending to a squeaking garage door is something that’s quite within the skills of a competent DIYer.
Inspecting the Door
The first step is to inspect the door mechanism. You’ll need a step ladder so that you can access the upper parts of the mechanism. Look for any moving parts that are showing signs of lack of lubrication or are worn.
Make sure that any wheels that run in tracks are operating smoothly and are not loose. Nylon wheels will generally be quieter and longer-lasting than metal ones. If any parts are badly worn and need replacing, a company offering garage door installation in Dunstable such as http://garagedoorsrus.co.uk/garage-door-installation-dunstable/ will be able to advise you on whether the door can be repaired or is in need of replacement.
Tightening and Lubricating
Your inspection should have spotted any loose bolts or screws. Make sure you tighten these up, but be sure not to over-tighten them as that could make things worse. Some items such as hinges need to have a certain amount of play to work properly.
Next you need to lubricate moving parts. Using a silicone spray lubricant on metal parts will help guard against corrosion too. You need to lubricate the hinges, rollers, springs and the locking bars. For heavy-duty components like rollers it’s better to use grease rather than a spray, as the effects will last longer.
Whatever lubricant you use, make sure it’s suitable for outdoor use, as it will have a longer life and help protect your door mechanism from variations in humidity and temperature.
Once you’re finished lubricating, open and close the door a few times to check that everything is running smoothly. This will also let you see if the squeak still persists. If it does, inspect the door again and look to see if there are any moving parts that you’ve missed in the lubrication process. Once you’re happy that everything is smooth and quiet, use an old rag to clean up any excess lubricant, as it can attract debris and lead to clogged parts.
Keep Reading Energy-Efficient Materials for Tomorrow’s Homes
Share the knowledge with your friends through social networks.